Back to Resource Library

The above video will tell you how to make the floor non slip. It covers all of the materials needed and it goes through the process step by step.

When you receive your products, you will also get a full set of written instructions.


1. Before you begin.... gather everything you will need to do the job. Items needed include old towels, a tank sprayer or CLEAN bucket and a CLEAN sponge mop. (No soap for sure)

2. You will need an old tennis shoe for testing the floors before and after treatment.
First spread old towels to have a place to set buckets and equipment outside of the area to be treated.

3. You should be wearing protective clothing. This would include long pants and a long sleeved shirt. Gloves, eye protection and rubber boots are needed as well. The rubber boots are so that you can hose them off after walking in the treatment area.

4. You will want to clean the area to be treated with a ph neutral cleaner. Vinegar and water will be fine. Don't use a cleaner with soap in it. Soap can neutralize the chemicals. If your surface is greasy you will want to use our cleaner degreaser before you do any treatment..

5. Next you will do a small test area to determine how long you want to have the solution on your surface. The video will show you how to do that.

6. You will apply the chemicals to an area only a big as you can do in the time you have chosen. Usually this will be something like 2 to 6 minutes.

7. The neutralizer will be mixed in a bucket or garden sprayer. Have them ready before you apply the product to the floor.

8. You should apply the solution with a clean mop or window washer tool. If it is quarry tile you will want to aggitate it with a bristle brush.

9. After leaving the solutions on the floor for the time you have selected, you will apply the neutralizer over the treated area. This will stop the action.

10. Now it is just a matter of cleaning up the neutralized products. A wet vacuum or a mop and bucket will be fine. Just be sure to rinse several times.